$1719.99 Head Only  
 $1899.99 Head with Knockdown Stand 
 $1949.99 LU-1508NS Fully Assembled* 

The LU-1508NS has replaced the LU-563 and the LU-563N models.

Complete Unit "Knockdown" includes Head with ...
Table top (size 48" x 20"), Heavy Duty Legs, 
Now with SEWSTRONG SERVO Motor, Draw, V Belt,
Table Mount Sewing Light and Hardware. 

* For complete units assembled contact us 
for a freight charge. Complete units cannot 
be shipped by UPS and must be trucked.

• New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
• Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
• Compared with elliptical feed, rectangular feed helps reduce gathered stitches
• With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
• Well tensed seams are consistently produced without pitch errors
• With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
• Stitch length can be easily selected by the stitch dial
• Many improved features offer enhanced operability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large hand-wheel
• Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter 
• Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
• Alternating vertical movement mechanism prevents irregular stitches
• High 16 mm presser foot lift enables easy material handling
• Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
• If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
• Pressing the reset button will immediately return the machine back to the normal state
• Maximum stitch length:  9 mm
• Needle bar stroke:  36 mm
• Alternating vertical movement:  2.5 mm - 6.5 mm
• Thread take-up:  slide type
• Hook:  Vertical-axis, double-capacity hook
• Needle:  135x17 Nm160
• Thread:  #30~#5, B46~B138
• Weight (Head) :  93.7 lbs

Handles Heavyweight Materials with Ease

Safety Device Protects Needle and Hook from Possible Damage

Higher Lift of the Presser Foot Allows for Thicker Materials

Larger Bobbin Requires Fewer Changes

 

 Phone: 845- 627-8873

Freight not included in price.
For a freight charges, click on "Buy or Knock-Down". You will be directed to shipping -destination page.
Please remember, nothing is final until you submit your order.